100ml Multi-functional Metal Rust Remover Car Chassis Rust Remover Repair Protection Iron Metal Surface Maintenance and Cleaning

Rust inhibitors remove existing rust and convert it into an inert coating that seals in moisture and prevents future rust and corrosion.

No more scraping, sandblasting or sanding! This all-in-one surface conditioner and primer creates a black protective polymer barrier that is weatherproof and ready for a fresh coat of paint on your car's chassis. This chassis rust converter will provide more than double the rust protection.

feature:

Retrofit Existing Rust: Chassis Rust Converter converts and replaces existing rust with a black protective polymer barrier.

Protects Iron and Metal Surfaces: It restores and protects iron and metal surfaces on cars, trash cans, equipment, railings, and more.

Prevents Future Corrosion: This anti-rust treatment prevents future corrosion by preventing moisture from rain and snow. Dry after 20 minutes.

Non-toxic, smoke-free formula: It is a non-flammable, low VOC water-based treatment agent. It is non-toxic and emits no harmful fumes.


direction:

Finishing: Remove larger rust and scale particles with a wire brush or sandpaper. Thoroughly clean surfaces to remove dirt, dust and grease.

Application: Shake or stir well before use. Apply two coats with a brush, roller or pump spray, allowing at least 20 minutes to dry between coats. A 48-hour cure time is required before a premium paint can be applied.

Cleaning up: Application equipment should be cleaned immediately with soap and water.

General: Do not use this product if surface temperature is below 50°F. Store in a cool, dry place to prevent freezing or temperatures exceeding 100°F. For long-term protection of the iron surface, the cured anti-rust coating should be sealed with two coats of high-quality oil-based paint. No other primer is required.


Specification:

Material: water-based primer

Net content: 100ml

Note: Product packaging may vary, but the ingredients/materials remain the same.