Rechargeable 6-packs LED Traffic Emergency Warning Light， Interlligent ICS Safety Square LED Road Flare， Runway Alert

Rechargeable 6-packs LED Traffic Warning Light, Emergency Square LED Traffic Light, Novel Interlligent ICS Safety Road Flare

High Quality TBD-0012 interlligent ICS safety LED Road Flares

Product Photo

Description

Novel Interlligent ICS Safety Road Flare using 2.4G radio-linked frequency technology and advanced electronic gyroscope technology which can sort the flares automatically much like a runway landing "Rabbit" that warns and guides traffic around the incidents. Easy to deploy; Single button press; An advance in traffic guidance and safety. Automatically selects top or side LEDs based on angle orientation of flare (lockable). Change patterns to all flares from any single one in the same frequency. These are not available with the traditional or other flares on the market. It's perfect for police, fire, maintenance crews, DOT safety workers, road or bridge working, airport sliding way and runway alert.

Specification and Features:

1. Size: 108*92*30mm

2. Powered by LI-battery 703040 for rechargeable one.

3. Battery Life: 72 hours of continous flash (pattern and LED dependent)

4. 360 degree horizontal viewing angle, 180 degree vertical viewing angle

5. Five flash patterns

6. 12 bright Side LEDs and 4 bright Top LEDs

7. Battery status check during power on

8. Convert Alternative and Sync flash by push the button on any single flare

9. Turn off all flares by one button

10. 50+ foot range (15 meters) between flares. No Quantity Limited.

11. Automatically selects top or side LEDs based on angle orientation of flare (lockable)

12. Magnetic base (can attached to back of vehicle to create light bar)

13. Different LED and case color options: orange, red, blue, amber/yellow (custom colors upon request)

14. Rechargeable suitcase, AC charger: Input 100-240V,  Car charger: Input 12-24V   Output: 2000MA/5.5V.  

The Functions of the (ON/OFF) button:

1. The flare can test the battery state with simple Click the ON/OFF button.

Red light: Flash 4 times = full batteries over 75%

                Flash 3 times = good batteries over 50%

                Flash 2 times = low batteries over 25%

                Flash 1 time = very low batteries. We suggest charging batteries

While testing the battery, the flares are being connected wirelessly and take 2 seconds to turn on. The preceding flare must be flashing before turning on the next flare. (means must turn on the flare one by one). The rest can be done in the same manner

Simply Click ON/OFF button to change the flash pattern ( At the same time there are green light show which pattern now). The flare has 5 flash patterns. So the green light flash once means in the pattern 1, twice means pattern 2 and so on.

2. Alternative and Synchronized flash mode can be switched by clicking ON/OFF button twice quickly.

3. All flares in the same frequency can be turn off at the same time by press ON/OFF button in any single flare 3 seconds.

The Function of the Pi button:

1. The simple click of the Pi button will lock the side 12 LED lights flashing.

2. The 2nd click of the Pi button will lock the top 4 LED lights flashing

3. The 3rd click of the Pi button will bring the flare back to its default state where the tilt sensor controls the choick of LEDs.  When the flare is in the horizontal position (lying flat on the ground) the 12 side LEDs will illuminate. When the flare is in the vertical position (e.g. magnetically attached to the back of the truck tailgate) the 4 top LEDs will illuminate. The flare will automatically adjust the side which the LEDs flash according to the flares orientation.

4. Press Pi button for 3 seconds and only turn off single flare but not the whole set.

We always offer the best quality products and fast delivery. Thanks so much for our dear client give us good feedback one by one:)